The BMX world has always been green with envy of the PK Ripper, so we gave them even more to be jealous about with the new Antifreeze Green Perry Kramer PK Ripper 27.5! This bike was designed by the one and only Perry Kramer, the “PK” of PK Ripper. The bike is designed around a large version of the classic PK Ripper frame & built with Landing Gear forks, 27.5” x 2.5” Vee Speedster tires, sealed internal headset, internal cable routing, Tektro hydraulic disc brakes, Oakley B-1B grips, and of course Perry’s stamp of approval.
Suggested Rider Size 5'3"+ (160cm+)
SPECS:
- Frame: 6061 Aluminum Floval Tubing, Internally-machined Integrated Head Tube, Symmetrical Looptail Rear End, 73mm Euro Bottom Bracket, 142mm Spaced Dropouts, Internal Cable Routing on Top Tube, Disc Brake Tabs
- Fork: Landing Gear, Full Cr-Mo, 419mm Axle to Crown, 29mm Offset, 110mm Spaced Dropouts
- Crankset: SE Racing 175mm Forged Alloy 2-pc Cranks, Pedal Boss Inserts, External Sealed Euro Bottom Bracket, 24mm Hollow Alloy Spindle, 39T Alloy Chainring
- Pedals: X-Pedo Low-profile Platform w/ Removable Pins
- Chain: KMC S1
- Wheelset: Alloy 36H Nutted Hubs, Sealed Rear, 110mm Front Hub & 142mm Rear Hub, w/ Alex DP30 Tubeless Compatible, Double-Wall Disc Rims, 17T Cassette, Stainless Spokes
- Tires: Vee Tire Co x SE Racing Speedster, 72TPI, 27.5" x 2.5" Front & Rear
- Brakeset: Tektro HD-M285, Hydraulic Disc, Easy to Adjust Open System, Dual Piston, Automatic Caliper Positioning, 180mm Front Rotor, 160mm Rear Rotor
- Brake Levers: Tektro HD-M285, 2-Finger Alloy, Front & Rear
- Headset: FSA Integrated Orbit CE, Sealed 1-1/8"
- Handlebar: Big Honkin' Cr-Mo Cruiser Bar, 29" x 7", 12° Backsweep, 2° Upsweep
- Stem: Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, 55mm Reach
- Grips: Oakley B-1B, Made in USA
- Seat: Perry Kramer SE Flyer Seat w/ Custom SE Bottle Opener Brace
- Seatpost: Micro-Adjust Alloy, 27.2mm
- Seat Clamp: Promax Quick Release Seat Clamp, 31.8mm Inner Diameter
- Accessories: Alloy Valve Caps, SE Chain Tensioners
- Weight: 30.1 lbs / 16.65 kgs
**Specifications are subject to change without notice.**
GEOMETRY:
- Top Tube, Actual 22.8"
- Seat Tube, Center To Top 15.7"
- Seat Tube Angle 73°
- Head Tube Angle 71°
- Chainstay Length 17.4"
- Wheelbase 42.7"
- Bottom Bracket Height 11.9"
- Standover 29.5"
- Stem 55mm
- Handlebar Width 29"
- Crank 175mm
- Wheel Size 27.5"
- Seat Post Diameter 27.2mm
PLEASE NOTE: We can ONLY ship SE complete bikes to USA addresses in the lower 48 States for free shipping. Canada, Alaska and Hawaii residents- PLEASE contact us for a shipping quote, as we will need your complete address in order to calculate correct UPS shipping!
If you are outside the USA, you MUST go through an authorized SE RACING bike shop in your country. While our website will allow you to add this bike to your shopping cart, we CANNOT process any SE bike orders leaving the USA. If you are an overseas customer, and you pay for a SE Bike order, your order WILL be canceled, and your funds will be immediately returned.
IMPORTANT: To ensure that every component on your bicycle is working properly, PlanetBMX recommends that all SE RACING bicycles be assembled by a qualified bicycle mechanic. Improper assembly of your bicycle may lead to premature wear or failure of individual components. Failure to do so may void the manufacturer warranty.
* Please check out www.SEbikes.com for a dealer in your country!
Product Code: 29231375527
